b'RESTARTING THE BATTERY MODULEIf the battery module is not working properly, it is possible to restart it by following the procedure described below:1. Detach the battery module from its base plate;2. Plug the battery charger into a power socket;3. Plug the micro-USB connector into the port provided on thebattery module;4. Pull out the connector.The restart of the battery module is acknowledged by the yellow LED on the up arrow turning on.Should the malfunction persist, it is possible to manually force the module restart:1. Detach the battery module from its base plate;2. Press the programming button on the battery module for at least 10 seconds. Also in this case, the restart of the battery module will be acknowledged by the yellow LED turning on.11'