b'Memorizing a channel1.Detach the battery module from its base plate;2.Select the required channel on the remote control display bypressing the +/- buttons;3.Using a sharp tool, such as the end of a paperclip, pressthe programming button on the battery module (see image opposite) for 3 seconds, until the yellow LED on the up arrow turns on and immediately off;4.Within 20 seconds hook the battery module onto the baseplate to be memorized; 5.The yellow LED will remain steadily on and, within 10 seconds, it will be necessary to send the association command by pressing the up and down push buttons simultaneously on the remote control, until the green LED on the battery module flashes quickly.Deleting a channel1.Detach the battery module from its base plate;2.Call up the channel to be deleted on the remote control displayby pressing the +/- push buttons;3.Press the programming button on the battery module for 3seconds, until the yellow LED on the up arrow turns on and immediately off;11'