b'TECHNICALINFORMATIONColoursThe Uni-Blinds ScreenView integral blind is designed for neutral dcor, available with white or silver slats. S102 WHITE S157 SILVERSolar reflection 68%Solar reflection 64% S102Light reflection 74%S157Light reflection 64% Solar absorption 32% Solar absorption 36%Standard colourThe above values are subject to standard production tolerances (+/-3%)Vertical movement at any inclination using a control device mounted as standard at the bottomof the blind or optionally at the top.Side guides Extruded aluminium assembled to the spacer bars. Powder coated to colour co-ordinate the slats. U-shaped guide conceals the two lateral ladder tapes, preventing light transmission and improvingthe aesthetic and privacy effect of ScreenView. Head rail Extruded aluminium featuring a thermoplastic polymer front panel, designed to achieve thermal break. Powder coated extruded aluminium part and polymer part colour co-ordinated with the slats. Spacer bars Stainless steel and polypropylene co-extruded 16mm warm edge spacer bar on all sides of the blind. These allow the thermal performance of the insulating glass incorporating the ScreenLine blind system to be optimised. Slats35mm wide aluminium slats, suitably machined at the ends to hold and lock the lateral flat ladder tapes. Available in white and silver colours.Feasibility chart* Width (mm) min. 200mmmax. 500*Height (mm) min. 300mmmax. 1500*Internal glass maximum thickness 44.1 (8.38)Minimum overall thickness 24mm (including frame and glass)*** Insulating glass unit dimensions. Available for rectangular shapes only. ** Fire rated ScreenView integral blind units will have a higher thicknesscontact Morley Glass for details.'